Mirrored lingerie chest has mirrors on the top surface and on each of the drawers. Placing a chest of drawers covered in mirrors in a crowded room creates an illusion of more space. The reflections on the bureau top make the room seem deeper. Mirrors reflect the objects placed on the surface of the glass. You can create a mirrored agency for your home by following a simple process that requires cheap tools.
Measure the front of the drawers and mirrored lingerie chest to determine the size of the cutter pieces. Does not measure to the edges. Leave about 1/4 inch on all sides of the glass piece. Measure the inside of the handles for the drawers. The glass cannot be placed on top of the handles. Select the right size mirror glass with a blank marker and a straight edge. Moisten the glass knife with mineral oil to prepare it for cutting. Wear protective goggles to protect the eyes.
Place the glass on a table with a cutting pad below to prevent the blade from destroying the wood. Cut the glass along the markings using a straight edge as a guide. Cut an edge by running the blade from the body first and then back towards it. Do not lift cut while driving down the line. Remove the glass piece by placing the cut line on the edge of the table. Hit the side of the glass hanging outside the mirrored lingerie chest with the weighed sphere at the opposite end of the cutter. The glass will bend apart. Sand the edges of the glass with 220 grit sandpaper to remove the sharp edges.Tag: mirrored chest, mirrored lingerie chest, target lingerie chest