Bathroom wall mirror – Homeowners sometimes confused how to hang these mirrors because they have flat back with no visible hooks. It’s a good idea to have another person nearby to help lift the mirror.
Hold the bathroom wall mirror at the place where you want to install it and place a level on the top of the mirror to make sure you’re right. Does another person trace the mirror with a pen to draw a sketch on the wall? Hold a stud looking up to the bathroom wall inside the mirror outline. Turn the stud on and move it over the wall until it lights up to indicate a wall rule. Place a small pencil on the wall of the place and find some remaining wall rails in the area. Insert a 1/4 inch drill into a drill and create a one-inch deep hole in the marked wall stud near the lower left side of the mirror contour.
Hold a plastic bathroom wall mirror with the open end upwards and align the screw holes with the borehole. Insert the screw into the screw hole and secure it with a screwdriver. Repeat the process installation drilling and clips to install one to two additional clips along the bottom of the mirror contour. Lift the mirror in place and adjust the lower edge of the mirror in the clips. Press the mirror against the wall and keep the other person in place.